Home » News » Guide Wheel Jack

Guide Wheel Jack

Views: 1     Author: Site Editor     Publish Time: 2024-11-08      Origin: Site

Inquire

The wheel jack is a tool that can be used to lift heavy objects by manual operation. It is mainly composed of the jack body, guide wheel and handle. The guide wheel is designed at the bottom of the jack body to make it easier for the jack to move on the ground. The hydraulic principle is used inside the jack body, and the flow of hydraulic oil is operated by the handle to realize the lifting and lowering of the heavy object by the jack.

When using the guide wheel jack, first ensure that the jack is in a stable position and the weight is correctly placed on the top support point. Then operate the handle to slowly lift the weight to avoid instability caused by rapid lifting. During the operation, it is necessary to pay attention to whether the guide wheel jack is working properly. If there is any abnormality, stop using it and repair it in time.

The guide wheel jack is suitable for various occasions, such as car repair, construction sites, and other work that requires lifting heavy objects. Its advantages are easy operation, strong stability, and the ability to absorb part of the impact force to ensure work safety. When using the guide wheel jack, be sure to follow the instructions and pay attention to maintenance and maintenance to extend the service life.

In general, the guide wheel jack is a very practical lifting tool that can help people easily handle heavy lifting work. Mastering its working principle and correct use method can not only improve work efficiency, but also ensure personnel safety.

(1) The foundation of the jack. The foundation of the jack should be stable, solid and reliable. When setting the jack on the bottom, it should be padded with wooden blocks or other appropriate materials to expand the force-bearing area.

(2) Placement of the jack. When placing the jack on soft ground, wooden blocks should be placed under the jack to prevent it from tilting after force is applied. When the weight is raised, supporting pads should be placed under the weight at any time, but hands should not enter the danger zone by mistake. During the placement of the jack, keep the load center of gravity line consistent with the jack axis. During the lifting process, be careful to prevent the jack from tilting or tilting due to the sinking of the jack foundation or the horizontal displacement of the load. To prevent the jack from sliding when it contacts the metal surface or concrete smooth surface of the weight, padded with hardwood blocks if necessary.

(3) Lifting operation. The lifting height of the jack should not exceed the effective lifting range. When lifting large objects (such as beams), the two ends should be lifted and lowered separately. When one end is lifted, the other end must be padded, secured, and placed firmly. Do not overload the jack.


If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Contact Us

Copyright© 2024 Renqiu Chenwei Machinery Manufacturing Co., Ltd.All Rights Reserved.| Sitemap